User manual

Microgate MicroGraph LED User Manual Page 39 of 88
2.7 CLOCK
This program allows you to display the time of the internal MicroGraph clock.
2.7.1 SETUP
It is possible to set the date and time of the internal clock.
NOTE: When setting the time, MicroGraphLED shows the time of first setting. If no value is modified, time is
not changed and continues to run as if Setup had not been used.
Keep the LAP-SETUP button pressed for at least 2 seconds to enter the Setup. Press START-MODIFY to change
the displayed values.
Configuration
HH:MM:SS | HH:MM Set display mode with START-MODIFY
Advanced Setup ? Press any key to continue.
Yellow = Yes Press LAP-SETUP to enter the general setup (see par. 2.1)
Green = No Press START-MODIFY to scroll the setup of the current program
Set R.T. Date
Day = 13 Set the day of the month with START-MODIFY
Press LAP-SETUP
Set R.T. Date
daynum = 3 Set the week day with START-MODIFY
(1 Sunday, 2 Monday, ..., 7 Saturday)
Press LAP-SETUP
Set R.T. Date
month = 7 Set the month with START-MODIFY
(1 January, 2 February, …, 12 December)
Press LAP-SETUP
Set R.T. Clock
HH = 0 Set the time with START-MODIFY
Press LAP-SETUP
Set R.T. Clock
MM = 0 Set the minutes with START-MODIFY
Press LAP-SETUP
Set R.T. Clock
SS = 0 Set the seconds with START-MODIFY
Press LAP-SETUP