User manual

Microgate MicroGraph LED User Manual Page 38 of 88
2.6.3 TIME TO ZERO
In this case the countdown starts from the time set by the user and stops at zero, with the last five
seconds signaled with a beep.
2.6.3.1 SETUP
Cycle:
HH = 0 Set the hours between each start with START-MODIFY
Press LAP-SETUP
Cycle:
MM = 0 Set the minutes between each start with START-MODIFY
Press LAP-SETUP
Cycle:
SS = 0 Set the seconds with START-MODIFY
Press LAP-SETUP
Cycle:
mm = 0 Set the thousandths between each start with START-MODIFY
Press LAP-SETUP
Greentime
6 Set the seconds of green light time and the other one with START-MODIFY
Press LAP-SETUP
One cycle | Repeat Cycle Press START-MODIFY to set one countdown or continuous countdown
repetitions.