User manual

Microgate MicroGraph LED User Manual Page 31 of 88
Set Starttime
mm= 0 Set the thousandths of a second
Press LAP-SETUP
Autoreset
Time= 0 Set the automatic Reset time (in seconds). After a stop command and
when the above-stated time has passed, the chronometer is reset to
zero. An invalid (zero) time disables the Autoreset function.
Press LAP-SETUP
Start – Stop The Start button is used at start and finish
Start – Start The Start button is used only at start
The chronometer is stopped and shows the preset time, ready to start.