User manual

Microgate MicroGraph LED User Manual Page 24 of 88
2 INTERNAL PROGRAMS
Besides the 'Base Program', which waits for PC or chronometer commands and displays the
received information, MicroGraph LED display boards also have a series of internal programs for
various timing needs.
The programs available at the time of printing this guide are:
Base Program
Waits for commands via serial cable or IP (Ethernet/WiFi)
Internal Program
Automatically executes the stored program.
Timer
Works like a normal 1/100 second precision chronometer.
Speedmeter
Measures the speed based on any length.
Countdown
Displays various countdown types.
Clock
Displays the time of the internal clock of the display board.
Date & Clock
Displays date and time of the internal clock of the display board.
Lap Timer
Timing of lap times.
Test Pixel
Checks that the LEDs work correctly.
Self Timer
Manages a Self-Timing course (with token machine and optional printer).
Self Timer Parallel
Manages a Self-Timing parallel course.
OSM6
Connection with Omega OSM6 chronometer.
Powertime
Connection with Powertime chronometer.
Alge
Connection with Alge chronometer.
Omega
Connection with Omega chronometer.
Stalker
Connection with Stalker speedmeter
Jugs
Connection with Jugs speedmeter
Athletic
Program for cycle-racing and athletics tracks.
To change program follow these steps:
 Keep the YELLOW LAP-SETUP button pressed for at least 3 seconds.
 The currently selected program is displayed.
 Press the GREEN START-MODIFY button to scroll down the above-stated program list.
 Once the desired program has been reached, press the LAP-SETUP button to confirm.
 Depending on the chosen program, further settings may be required or the program is
executed immediately.