User manual

Microgate MicroGraph LED User Manual Page 20 of 88
1.6 RADIO SYSTEM
Some programs of the MicroGraph display board can be used with the Linkgate radio system
connected via DecRadio to the RADIO connector on the control panel. Linkgate allows the long-
distance transmission of START, STOP, and LAP signals, as well as serial data using the Base
Program.
For further information about the Linkgate system, please refer to the relevant REFERENCE GUIDE.
In the following paragraphs the possibility of using the system via radio will be highlighted by the
presence of a RADIO section.
NOTE: In order to be able to use the Linkgate system in the Timer, Speedmeter, and Lap Timer
Program, the radio channel must be set correctly in the Base Program.
Figure 24 - DecRadio LinkGate