User manual

Microgate MicroGraph LED User Manual Page 17 of 88
1.5.2.2 CONNECTING TWO ROWS (VERTICAL ASSEMBLY)
Extract the two upper pins from their slot by unscrewing the lock from the innermost hole (Figure
16). Position the pins on the upper side and fix them by driving the screw into the same hole
(Figure 17.)
Figure 16 – Extracting the pins
Figure 17 – Fixing on the upper part
In order to ensure a perfect connection without spaces between the display boards, unscrew and
remove the handle of the lower display board, as well as the feet of the top display board.
Figure 18 - Unscrew the two handle screws
Figure 19 - Removing the handle