Specifications

Software TIM Connect
thermoIMAGER TIM 20
1 IR-Live picture from the camera
2 Temperature profile: Shows the temperatures along max. 2 lines, which can have any
size and position inside the picture.
3 Reference bar: Shows the scaling of the palette.
4 Temperature of measure
area:
Shows the temperature according to the selected measurement
function (example in the picture: average temperature in the
measure points area. This value is shown also inside the IR picture
(right top corner)
5 Control displays: Enables displaying of all temperature values in the defined
measure areas, Cool Spots, Hot Spots, temperature at cursor,
internal temperature and chip temperature
6 Alarm displays: Diagram of defined temperature scale showing low alarm value
(blue arrow) and high alarm value (red arrow). The color changes
to red (when temperature above the high alarm value) and to blue
(when temperature below the low alarm value).
7 Histogram: Shows the statistic distribution of single temperature values.
8 Automatic/ Manual scaling of
displayed temperature range:
</> : Min, Max 1 σ: 1 Sigma 3 σ: 3 Sigma
9 Icon enabling switching between palette colors