Specifications
Table Of Contents
- Content
- Welcome!
- Warranty
- 1. Getting Started
- 2. Software Configuration
- 3. Data Capturing
- 3.1. Open Files
- 3.2. Replay of Files
- 3.3. Editing Video Sequences
- 3.4. Saving Files
- 3.4.1. Setting the Recording Frame Rate
- 3.4.2. Setting the Recording Modes
- 3.4.3. Temporary Recording File
- 3.4.4. Saving Radiometric Video Sequences or AVI Files
- 3.4.5. Saving Image Data as Radiometric Snapshot or Text File
- 3.4.6. Saving Text File of the Temperature / Time Diagram
- 3.4.7. Location and Filename Templates of Triggered Recordings
- 3.4.8. Display of Snapshots in a Separate Window
- 3.4.9. Saving Images or Screenshots to Clipboard
- 4. Data Processing
- 5. Visual Camera (TIM200 only)
- Linescanner Mode
- 7. Further Information
thermoIMAGER TIM 9
1
IR image from the camera
2
Temperature profile: Shows the temperatures along max. 2 lines at any size and position in the image.
3
Reference bar: Shows the scaling of temperature within the color palette.
4
Temperature of measure area: Analyses the temperature according to the selected shape, e.g.
average temperature of the rectangle. The value is shown inside the IR image and the control displays.
5
Control displays: Displays all temperature values in the defined measure areas like Cold Spots, Hot
Spots, temperature at cursor, internal temperature and chip temperature.
6
Alarm settings: Bar showing the defined temperature thresholds for low alarm value (blue arrow) and
high alarm value (red arrow). The color of numbers within control displays changes to red (when
temperature above the high alarm value) and to blue (when temperature below the low alarm value).
7
Histogram: Shows the statistic distribution of single temperature values.
8
Automatic / manual scaling of the palette (displayed temperature range): Man., </> (min, max),
1σ : 1 Sigma, 3σ : 3 Sigma
9
Icon for quick access to Image Subtraction function
10
Icon enabling switching between color palettes