MICRO-D Full Manual V.1.2 H.
MICRO-D Full Manual V.1.2 GENERAL SAFETY AND PRECAUTIONS The MICRO-D is manufactured to meet international safety standards. Read the following safety precautions to avoid injury and prevent damage to the MICRO-D or any products connected to it. 1. Use a correct power source. Do not connect this product to a power source that supplies more than the specified voltage (DC12V), as this will cause damage to the unit. 2. Never insert anything metallic into the MICRO-D as this can cause electric shock. 3.
MICRO-D Full Manual V.1.2 TABLE OF CONTENTS Chapter 1: Packing Contents CONTENTS IN THE PACKAGE 5 Chapter 2: Getting To Know Your MICRO-D 6 MICRO-D Chapter 3: Remote control REMOTE CONTROL PANEL 8 Chapter 4: Getting Started OVERVIEW OF SET UP PROCEDURES 10 Chapter 5: Hardware Installation SD MEMORY INSTALLATION 11 CONNECTING MICRO-D TO YOUR TV SET OR MONITOR 11 ALARM INSTALLATION 13 Chapter 6: OSD MODE 1. ACCESS TO OSD MENU 14 2. MAIN MENU 14 3. SYSTEM SETUP 3.1 TIME & DATE OVERLAY 3.
MICRO-D Full Manual V.1.2 18 5. EVENT SETUP 5.1 ALARM SETUP 5.1.1 ALARM INPUT 5.1.2 INPUT TYPE 5.1.3 ALARM OUTPUT 5.1.4 ALARM CONTINUE 5.2 MOTION DETECTION 5.2.1 SENSITIVITY 5.3 SCHEDULE SETUP 5.3.1 TIME 5.3.2 TIME AND EVENT 19 6. SUB MENU 6.1 PASSWORD CHANGE 6.2 FILE INDEX RENEW Chapter 7: SCREEN MODE 1. LIVE SCREEN MODE 1.1 SCREEN MESSAGE 1.2 SCREEN ICON 20 2. SEARCH MODE 2.1 SEARCH LIST 2.2 SEARCH FACTOR 2.2.1 SEARCH FACTOR – TIME 2.2.2 SEARCH FACTOR – EVENT 2.2.3 SEARCH FACTOR – BOTH 2.2.
MICRO-D Full Manual V.1.2 Chapter 1: Packing Contents ▶ Contents in the package MICRO-D Main Unit Remote Controller AV-IN / AV-OUT Connector Terminal Block 12V Power Supply Installation CD Quick Guide Max.
MICRO-D Full Manual V.1.2 Chapter 2: Getting To Know Your MICRO-D ▶ MICRO-D ④ ③ ⑤ ⑦ ② ⑥ ⑧ ⑨ ⑩ ① This chapter briefly describes the functions of each button on MICRO-D. The buttons are used to operate the basic functions of MICRO-D, such as recording, playback, fast-forward, reverse play and etc. For more details on the set-up and operation of MICRO-D, refer to Chapter 6, MICRO-D MENU.
MICRO-D Full Manual V.1.2 1 Sensor-in / Alarm-out The sensor terminal block is used to connect a sensor such as PIR to the MICRO-D. If you add motion sensor devices to your MICRO-D, the video recording can be triggered by event. The alarm output terminal is used to install a single alarm device. 2 SD Memory Slot Insert SD Card into the slot for storing data. 3 Recording LED This light indicates while MICRO-D is on recording mode.
MICRO-D Full Manual V.1.2 Chapter 3: Remote control Start MICRO-D recording or stops recording. Turn the SD power off when pressing the REC button for 3 seconds. (Recording can resume after 20 seconds) Enter OSD menu. On OSD menu, go to the upper menu. 1 REC 2 MENU 3 UP/ DOWN On OSD menu, change values. On search mode, play the previous or next recorded file. 4 LEFT/ RIGHT REW: Fast Rewind (X2-X4-X8-X16) FF: Fast Forward (X2-X4-X8-X16) On OSD menu, chooses menu fields and change values.
MICRO-D Full Manual V.1.2 11 ENT On playback mode, playback at X1. On OSD menu, enter values. 12 SEARCH Enter Search menu. On search menu, move to upper search menu. 13 MODE Switch between playback mode and live view mode.
MICRO-D Full Manual V.1.2 Chapter 4: Getting Started OVERVIEW ON SET-UP PROCEDURES Below is an overview of the MICRO-D installation procedures, (A detailed explanation is found in Chapter 5 - Hardware Installation.) (1) Insert a SD MEMORY. (2) Connect MICRO-D to a TV set or MONITOR. (3) Connect camera to MICRO-D (4) Connect optional accessories (sensors or alarm). (6) Connect the power. (7) Turn the power on. (8) Start TV Monitoring and recording.
MICRO-D Full Manual V.1.2 Chapter 5: Hardware Installation SD MEMORY INSTALLATION ① Format SD Memory Insert SD memory into SD card slot on your PC and format it in FAT32. ※ In case there is no card slot on your PC, use additional memory reader device. ② Insert SD Memory into SD slot on MICRO-D After formatting, take SD Memory from your PC and insert it into SD slot on MICRO-D. ③ Backup recorded files in SD Memory When SD Memory storage is full, the recorded files can be backed up in your PC.
MICRO-D Full Manual V.1.2 ② Audio Input/Output Connection (For TV / monitor speaker) `` Connect the microphone to AUDIO-IN terminal of AV-IN connector; connect the speaker to AUDIO OUT terminal of AV-OUT connector. Note: The RCA cable required for this connection is not supplied with the MICRO-D. ※ SanDisk SD cards have been tested and proved to be compatible with MICRO-D. The compatibility with other brands is not guaranteed.
MICRO-D Full Manual V.1.2 ALARM INSTALLATION The MICRO-D has an internal switch for sounding an alarm. When a sensor is triggered, the alarm is activated as well. There are two steps to install an alarm. 1. Connect the alarm power lines to the alarm switch terminal. 2. Connect the alarm power lines to the appropriate power source. Refer to the diagram below for information on how to connect an alarm to your MICRO-D.
MICRO-D Full Manual V.1.2 Chapter 6: OSD MODE 1. ACCESS TO OSD MENU MICRO-D 1.x **** Press ‘MENU’ button on remote control to access to MICRO-D OSD menu. Please refer to ‘Chapter 3: Remote control’ about how to use remote control buttons. Password is ‘0000’ as default. The password can be changed on ‘[SUB MENU]Æ[PASSWORD CHANGE]’. In order to select cameras for recording, set recoding quality, schedule recording times and to set other operation parameters, you will need to access the MICRO-D menu.
MICRO-D Full Manual V.1.2 3. SYSTEM SETUP Configure current time and ‘DAY LIGHT SAVING’ option. On setting the current time, the field order should be as follows; 2004/02/17 = year/month/day 19:44:32 = hour/minute/second 3.1 TIME & DATE OVERLAY: This is the option to display time and date on the screen 3.2 TIME SET > DAY LIGHT SAVING SELECT ‘ON’, when you want to use day light saving time. You can set up the specific period when day light saving is applied. 3.
MICRO-D Full Manual V.1.2 4. VIDEO SETUP On 4.
MICRO-D Full Manual V.1.2 4.2 VIDEO QUALITY LEVEL (HIGH / NORMAL / LOW): Select desired video level from ‘LOW’ to ‘HIGH’. MODE HIGH NORMAL LOW QUALITY(4CIF) 1800kbps 1000kbps 500kbps QUALITY(2CIF) 1200kbps 800kbps 400kbps QUALITY(CIF) 1000kbps 600kbps 300kbps 4.3 FRAME RATE PAL: Selectable among 25, 12, 8, 6, 3, 1 NTSC: Selectable among 30, 15, 10, 6, 3, 1 4.
MICRO-D Full Manual V.1.2 5. EVENT SETUP 5.1 ALARM SETUP 5.1.1 ALARM INPUT (ON / OFF): Select ‘ON’ if you want to use alarm input device. 5.1.2 INPUT TYPE: Select alarm input type between ‘Normal Open’ and ‘Normal Close’ NC: NORMAL CLOSE NO: NORMAL OPEN 5.1.3 ALARM OUTPUT: ALARM INPUT ALARM OUTPUT Normal Open Normal Open Alarm input type is Normal Open. The device connected to alarm output is in ‘OFF ‘status and turns ON when events occur. Normal Open Normal Close Alarm input type is Normal Open.
MICRO-D Full Manual V.1.2 5.1.4 ALARM CONTINUE: Regardless of post recoding time, recording triggered by EVENT (Alarm and Motion) continues during event max.30 Min. For example, the alarm recording is continued until the N.O. circuit becomes open again. 5.2 MOTION DETECTION 5.2.1 SENSITIVITY (LOW / NORMAL / HIGH): You can select the degree of sensitivity of motion detection. Set to HIGH for greater sensitivity to small movements. 5.3 SCHEDULE SETUP Make schedule for the recording time.
MICRO-D Full Manual V.1.2 Chapter 7: SCREEN MODE 1. LIVE SCREEN MODE In live screen mode, ‘time & date’ information, screen icons and messages are shown on the screen. 1.1. SCREEN MESSAGE Message Description INITIALIZING… Displays when the MICRO-D is first booted. WAIT… Displays when playback and live modes are switched or when the screen mode and OSD menu are switched. FILE NOT FOUND Displays when there is no recorded files in the SD or no search result on search mode.
MICRO-D Full Manual V.1.2 1.2. SCREEN ICON EMERGENCY Displays when in emergency record mode. MOTION Displays when in motion-triggered record mode. ALARM Displays when in sensor-triggered record mode. TIME Displays when in schedule record mode. FULL SYNC SEARCH Displays when empty space remains less than 5% of the total SD Card storage. (In case of 512MB SD, less than 100Mbyte) The icon disappears when ‘disk full warning is set to ‘OFF’ on OSD menu.
MICRO-D Full Manual V.1.2 2. SEARCH MODE When pressing ‘SEARCH’ button, LOGIN window appears. To Enter ‘Search Mode’, enter 4-digit password. 2.1 SEARCH LIST After pressing ‘SEARCH’ button on remote control, click ‘LIST’. The search results will be listed. TIME 2007 / 01 / 01 2007 / 01 / 31 00:00 23:59 LIST 2.2 SEARCH FACTOR: There are four ways to search recorded files; TIME, EVENT, BOTH (TIME & EVENT), NONE 2.2.
MICRO-D Full Manual V.1.2 2.2.3 SEARCH FACTOR – BOTH:‘ When you select BOTH, search factors are combined in multiple conditions such as TIME and ALARM / TIME and MOTION /TIME and MOTION and EMERGENCY etc. 2.2.4 SEARCH FACTOR – NONE: To search all the recorded files stored in the SD card. 2.
MICRO-D Full Manual V.1.2 APPENDIX TECHNICAL SPECIFICATION ITEM DESCRIPTION VIDEO Encoding H.264 Input Channel 1 Ch. Input impedance Input Format 75 ohm Unbalanced PAL/NTSC (Auto Detection), Composite, Auto detection function Maximum Input 1.0Vp-p @ 75 Ohm Unbalanced Output Channel 1 Ch. Output impedance 75 ohm Unbalanced Output Format PAL/NTSC (according to Input), Composite Maximum Output 1.
MICRO-D Full Manual V.1.2 Input 1 Ch. TTL(Internal full-up) Output 1 Ch.
MICRO-D Full Manual V.1.2 Approximate Recording Time Table 4CIF (704x480 / D1) Recoding Time (NTSC/PAL): SANDISK – SD/SDHC MEMORY Memory Usable Memory HIGH / 4CIF / 25fps NORMAL / 4CIF /25fps LOW / 4CIF / 25fps 512 MB 480 MB 28min 47min 1hr 26min 1 GB 960 MB 58min 1hr 40min 3hr 2 GB 1.9 GB 2hr 2min 3hr 26min 6hr 10min 4 GB 3.8 GB 4hr 4min 6hr 57min 12hr 29min 8 GB 7.4 GB 8hr 3min 13hr 46min 24hr 44min 16 GB 14.9 GB 16hr 27hr 42min 49hr 46min 32 GB 30.
