User`s manual

23
MICRO-D Manual V.1.3
7.2 SEARCH MODE
7.2.1 SEARCH LIST
7.2.2 SEARCH FACTOR:
There are four ways to search recorded files; TIME, EVENT, BOTH (TIME & EVENT), NONE
7.2.2-1 SEARCH FACTOR – EVENT:
When you select ‘EVENT (or BOTH) on SEARCH MODE’, subordinate search conditions open; ALARM /
MOTION / EMERGENCY / TIME (Here, the time means “scheduled time recording” using scheduling feature)
More than two conditions can be selected. In this case, each condition is connected with ‘OR’ condition.
7.2.2-2 SEARCH FACTOR – TIME:
TIME
2007 / 01 / 01 0 0 : 0 0
2007 / 01 / 31 2 3 : 5 9
LIST
To search recorded all files within the specific
period of time.
Enter the time period you wish to search for.
After pressing
‘SEARCH’ button on
remote control, click ‘LIST’. The search results
will be listed.
When pressing
‘SEARCH’ button,
LOGIN window appears.
To Enter ‘Search Mode’, enter 4-digit password.
* ALARM: To search recorded files triggered by
alarm-in event.
* MOTION: To search recorded files triggered by
motion
* EMERGENCY: To search recorded files generated
by emergency recording (full recording)
* TIME(scheduled time): To search recorded files
generated by time schedule