User`s manual

20
MICRO-D Manual V.1.3
5.1.4 ALARM CONTINUE
Continues recording until event stops regardless of post recording
5.2 MOTION DETECTION
5.3.1 Select the degree of sensitivity of motion detection in terms of (LOW / NORMAL / HIGH).
5.3 SCHEDULE SETUP
Make schedule for the recording time. Up to 4 schedules can be set.
5.3.1 TIME: Start to record when scheduled recording time is up.
5.3.2 TIME & EVENT: to record when motion is detected or an alarm occurs within scheduled period.
6. SUB MENU
6.1 PASSWORD CHANGE
The Factory Default Password is 0000. To
enter this number, press the UP, DOWN
button on the remote control. Once you input
the current password, set a new four digit
password using the buttons UP, DOWN on the
remote control. Then, confirm your new
password by entering the number again. *
PASSWORD ENABLE: ‘NO’
Select ‘NO’, if you want to enter the OSD
MENU without Password.
6.2 FILE INDEX RENEW
The index file is automatically generated and
stored in the SD card when inserted into
MICRO-D. If the index file does not match the
files actually stored in the SD card, users can
synchronize the index file list and the actual
file list. While synchronizing, the process
percentage is displayed; on completion the
value returns to ‘NO’.
YES
ON
30 MB
125 MB
Yes
No
112 MB
480MB
Yes
No
112 MB
480MB