User`s manual

11
MICRO-D Manual V.1.3
Chapter 5: Hardware Installation
SD MEMORY INSTALLATION
① Format SD Memory
Insert SD memory into SD card slot on your PC and format it
in FAT32.
※ Be sure to format SD Card in FAT32 and set default
allocation size to below 32KB
② Insert SD Memory into SD slot
on MICRO-D
After formatting, take SD Memory from your PC and insert it
into SD slot on MICRO-D.
③ Backup recorded files in SD Memory
When SD Memory storage is full, the recorded files can be
backed up in your PC. Insert SD card in your PC and move
the files of SD card into the HDD of our PC. You can also
check each recorded file through Micro D Player.
CONNECTING MICRO-D TO YOUR TV SET OR MONITOR
① Video Input/Output Connection (For TV / monitor screen display)
To display images from the MICRO-D, connect the video output signal to your MONITOR or TELEVISION.
Any Television with a VIDEO INPUT terminal is suitable for displaying the images. The diagram above
shows the video signal connections.
Connect the CAMERA to VIDEO-IN terminal of AV-IN connector; connect the MONITOR to VIDEO OUT
terminal of AV-OUT connector.
Note: The RCA cable required for this connection is not supplied with the MICRO-D.