MICRO-D Manual V.1.3 H.
MICRO-D Manual V.1.3 GENERAL SAFETY AND PRECAUTIONS The MICRO-D is manufactured to meet international safety standards. Read the following safety precautions to avoid injury and prevent damage to the MICRO-D or any products connected to it. 1. Use a correct power source. Do not connect this product to a power source that supplies more than the specified voltage (DC12V), as this will cause damage to the unit. 2. Never insert anything metallic into the MICRO-D as this can cause electric shock. 3.
MICRO-D Manual V.1.3 TABLE OF CONTENTS Chapter 1: Packing Contents CONTENTS IN THE PACKAGE 5 Chapter 2: Getting To Know Your MICRO-D 6 MICRO-D Chapter 3: Remote control REMOTE CONTROL PANEL 8 Chapter 4: Getting Started OVERVIEW OF SET UP PROCEDURES 10 Chapter 5: Hardware Installation SD MEMORY INSTALLATION 11 CONNECTING MICRO-D TO YOUR TV SET OR MONITOR 11 ALARM INSTALLATION 13 Chapter 6: OSD MODE 1. ACCESS TO OSD MENU 14 2. MAIN MENU 14 3. SYSTEM SETUP 3.1 TIME & DATE OVERLAY 3.
MICRO-D Manual V.1.3 5. EVENT SETUP 5.1 ALARM SETUP 5.1.1 ALARM INPUT 5.1.2 INPUT TYPE 5.1.3 ALARM OUTPUT 5.1.4 ALARM CONTINUE 5.2 MOTION DETECTION 5.2.1 SENSITIVITY 5.3 SCHEDULE SETUP 5.3.1 TIME 5.3.2 TIME AND EVENT 19 6. SUB MENU 6.1 PASSWORD CHANGE 6.2 FILE INDEX RENEW 20 Chapter 7: SCREEN MODE 1. LIVE SCREEN MODE 1.1 SCREEN MESSAGE 1.2 SCREEN ICON 21 2. SEARCH MODE 2.1 SEARCH LIST 2.2 SEARCH FACTOR 2.2.1 SEARCH FACTOR – TIME 2.2.2 SEARCH FACTOR – EVENT 2.2.3 SEARCH FACTOR – BOTH 2.2.
MICRO-D Manual V.1.3 Chapter 1: Packing Contents ▶ Contents in the package MICRO-D Main Unit Remote Controller AV-IN / AV-OUT Connector Terminal Block 12V Power Supply Installation CD Quick Guide Max.
MICRO-D Manual V.1.3 Chapter 2: Getting To Know Your MICRO-D ▶ MICRO-D ④ ③ ⑤ ⑦ ② ⑥ ⑧ ⑨ ⑩ ① This chapter briefly describes the functions of each button on MICRO-D. The buttons are used to operate the basic functions of MICRO-D, such as recording, playback, fast-forward, reverse play and etc. For more details on the set-up and operation of MICRO-D, refer to Chapter 6, MICRO-D MENU.
MICRO-D Manual V.1.3 1 Sensor-in / Alarm-out The sensor-in is installed to connect Sensor Terminal Block on the main body of MICRO-D and alarm activates when event occurs. If you add motion sensor devices to your MICRO-D, the video recording can be triggered by event. The alarm output terminal is used to install a single alarm device. 2 SD Memory Slot Insert or remove the SD CARD. 3 Recording LED GREEN LED turns on during Recording mode. 4 Status LED STA LED turns on when Event occurs or Error.
MICRO-D Manual V.1.3 Chapter 3: Remote control 1 REC Start EMERGENCY RECORDING or stops recording. 2 MENU Enter & Exit from OSD menu mode. 3 UP/ DOWN Change values from OSD menu. On SEARCH MODE, find recorded files. 4 LEFT/ RIGHT Change values from OSD menu. REW: Fast Rewind(X2-X4-X8-X16) FF: Fast Forward(X2-X4-X8-X16) 5 REW Fast Rewind(X2-X4-X8-X16) 6 FF Fast Forward(X2-X4-X8-X16) 7 PLAY Playback 8 STOP Stop playback.
MICRO-D Manual V.1.3 12 SEARCH Enter & Exit SEARCH menu. 13 MODE Switch between playback mode and live view mode.
MICRO-D Manual V.1.3 Chapter 4: Getting Started OVERVIEW ON SET-UP PROCEDURES Below is an overview of the MICRO-D installation procedures, (A detailed explanation is found in Chapter 5 - Hardware Installation.) (1) Insert a SD MEMORY. (2) Connect MICRO-D to a TV set or MONITOR. (3) Connect camera to MICRO-D (4) Connect optional accessories (sensors or alarm). (6) Connect the power. (7) Turn the power on. (8) Start TV Monitoring and recording.
MICRO-D Manual V.1.3 Chapter 5: Hardware Installation SD MEMORY INSTALLATION ① Format SD Memory Insert SD memory into SD card slot on your PC and format it in FAT32. ※ Be sure to format SD Card in FAT32 and set default allocation size to below 32KB ② Insert SD Memory into SD slot on MICRO-D After formatting, take SD Memory from your PC and insert it into SD slot on MICRO-D. ③ Backup recorded files in SD Memory When SD Memory storage is full, the recorded files can be backed up in your PC.
MICRO-D Manual V.1.3 ② Audio Input/Output Connection (For TV / monitor speaker) `` Connect the microphone to AUDIO-IN terminal of AV-IN connector; connect the speaker to AUDIO OUT terminal of AV-OUT connector. Note: The RCA cable required for this connection is not supplied with the MICRO-D. ※SanDisk SD cards have been tested and proved to be compatible with MICRO-D. But SD specifications can be changed without prior notice.
MICRO-D Manual V.1.3 ALARM INSTALLATION The MICRO-D has an internal switch for sounding an alarm. When a sensor is triggered, the alarm is activated as well. There are two steps to install an alarm. 1. Connect the alarm power lines to the alarm switch terminal. 2. Connect the alarm power lines to the appropriate power source. Refer to the diagram below for information on how to connect an alarm to your MICRO-D.
MICRO-D Manual V.1.3 Chapter 6: OSD MODE 1. ACCESS TO OSD MENU MICRO-D 1.x **** Press ‘MENU’ button on remote control to access to MICRO-D OSD menu. Please refer to ‘Chapter 3: Remote control’ about how to use remote control buttons. Password is ‘0000’ as default. The password can be changed on ‘[SUB MENU]Æ[PASSWORD CHANGE]’. In order to select cameras for recording, set recoding quality, schedule recording times and to set other operation parameters, you will need to access the MICRO-D menu. 2.
MICRO-D Manual V.1.3 3. SYSTEM SETUP 3.1 TIME & DATE OVERLAY: The option to display ‘TIME and DATE’ stamp on the screen. Select ‘OFF’ when you don’t want “Time and Date’ stamp on the screen on LIVE VIEW Mode or Playback Mode. 3.2 TIME SET: SETUP TIME 3.2.1 DAY LIGHT SAVING: SELECT ‘ON’, when you want to apply day light saving. Set up specific period when day light saving is applied. 3.3 TIME CORRECTION: When there is discrepancy between Micro-D time and actual time, user can correct the discrepant time.
MICRO-D Manual V.1.3 ※ Time correction is not applied on recording mode even when correction time comes. On ‘Full Recording (Emergency Recording)’ mode, recording block generates by 30 minutes. Time correction is applied when 30 minute recording block closes on ‘Full Recording’ mode. 3.4 LANGUAGE SETUP English, French, Dutch, German, Spanish. Japanese, Chinese 3.5 VIDEO OUTPUT Display NTSC or PAL according to unit’s CCD type. 3.6 BRIGHTNESS Select brightness value among low, normal and high.
MICRO-D Manual V.1.3 4. VIDEO SETUP 4.
MICRO-D Manual V.1.3 4.2 VIDEO QUALITY (HIGH / NORMAL / LOW): Select desired video level MODE HIGH NORMAL LOW QUALITY(4CIF) 1800kbps 1000kbps 500kbps QUALITY(2CIF) 1200kbps 800kbps 400kbps QUALITY(CIF) 1000kbps 600kbps 300kbps 4.3 FRAME RATE PAL: Selectable among 25, 12, 8, 6, 3, 1 NTSC: Selectable among 30, 15, 10, 6, 3, 1 4.
MICRO-D Manual V.1.3 5. EVENT SETUP 5.1 ALARM SETUP: Setup ALARM CONDITION 5.1.1 ALARM INPUT: Setup ALARM INPUT ON/OFF Select 'ON' for ALARM EVENT RECORDING. 5.1.2 INPUT TYPE: Select alarm input type between ‘Normal Open’ and ‘Normal Close’ NC: NORMAL CLOSE NO: NORMAL OPEN 5.1.3 ALARM OUTPUT: ALARM INPUT ALARM OUTPUT Normal Open Normal Open Alarm input type is Normal Open. The device connected to alarm output is in ‘OFF ‘status and turns ON when events occur.
MICRO-D Manual V.1.3 5.1.4 ALARM CONTINUE Continues recording until event stops regardless of post recording 5.2 MOTION DETECTION 5.3.1 Select the degree of sensitivity of motion detection in terms of (LOW / NORMAL / HIGH). 5.3 SCHEDULE SETUP Make schedule for the recording time. Up to 4 schedules can be set. 5.3.1 TIME: Start to record when scheduled recording time is up. 5.3.2 TIME & EVENT: to record when motion is detected or an alarm occurs within scheduled period. 6. SUB MENU 6.
MICRO-D Manual V.1.3 Chapter 7: SCREEN MODE 7.1 LIVE SCREEN MODE In LIVE SCREEN MODE, ‘TIME & DATE’ information, screen icons and messages are displayed on the screen. 7.1.1 SCREEN MESSAGE Message Description INITIALIZING… Displays when the MICRO-D is initializing during booting. WAIT… Displays when PLAYBACK &LIVE MODE are switched or searching recorded files. FILE NOT FOUND Displays when there is no recorded files in the SD or no search result on search mode.
MICRO-D Manual V.1.3 7.1.2 SCREEN ICON EMERGENCY Displays during EMERGENCY RECORD MODE. MOTION Displays during MOTION - TRIGERED MODE. ALARM Displays during SENSOR-TRIGERED RECORD MODE TIME Displays during SCHEDULE RECORD MODE. FULL SYNC SEARCH Displays when empty space remains less than 5% of the total SD Card storage. The icon disappears when ‘disk full warning is set to ‘OFF’ on OSD menu. Displays when the content of index file is not matched with recorded files actually stored in the SD.
MICRO-D Manual V.1.3 7.2 SEARCH MODE When pressing ‘SEARCH’ button, LOGIN window appears. To Enter ‘Search Mode’, enter 4-digit password. 7.2.1 SEARCH LIST After pressing ‘SEARCH’ button on remote control, click ‘LIST’. The search results will be listed. TIME 2007 / 01 / 01 2007 / 01 / 31 00:00 23:59 LIST 7.2.2 SEARCH FACTOR: There are four ways to search recorded files; TIME, EVENT, BOTH (TIME & EVENT), NONE 7.2.
MICRO-D Manual V.1.3 7.2.2-3 SEARCH FACTOR – BOTH:‘ When you select BOTH, search factors are combined in multiple conditions such as TIME and ALARM / TIME and MOTION /TIME and MOTION and EMERGENCY etc. 7.2.2-4 SEARCH FACTOR – NONE: To search all the recorded files stored in the SD card. 7.2.
MICRO-D Manual V.1.3 APPENDIX TECHNICAL SPECIFICATION ITEM DESCRIPTION VIDEO Encoding H.264 Input Channel 1 Ch. Input impedance Input Format 75 ohm Unbalanced PAL/NTSC(Auto Detection), Composite, Auto detection function Maximum Input 1.0Vp-p @ 75 Ohm Unbalanced Output Channel 1 Ch. Output impedance 75 ohm Unbalanced Output Format PAL/NTSC(according to Input), Composite Maximum Output 1.
MICRO-D Manual V.1.3 Alarm Input 1 Ch. TTL(Internal full-up) Output 1 Ch.
MICRO-D Manual V.1.3 Approximate Recording Time Table 4CIF(704x480 / D1) Recoding Time(NTSC/PAL): SANDISK – SD/SDHC MEMORY Memory Usable Memory HIGH / 4CIF / 25fps NORMAL / 4CIF /25fps LOW / 4CIF / 25fps 1 GB 960 MB 58min 1hr 40min 3hr 2 GB 1.9 GB 2hr 2min 3hr 26min 6hr 10min 4 GB 3.8 GB 4hr 4min 6hr 57min 12hr 29min 8 GB 7.4 GB 8hr 3min 13hr 46min 24hr 44min 16 GB 14.9 GB 16hr 27hr 42min 49hr 46min 32 GB 30.
