Troubleshooting guide

MAGNUM VERSION 8 MANUAL REVISION 3.1
73
The Unit Tons value is selected in the “Evap. Tonnage” cell in the Evaporator Information panel under the
MAG V8 screen.
The Unit Volts sensor is selected in the “Volts A” cell in the General Information panel. The Unit Amps sensor
is selected in the “Unit Amps” cell (If not used then the “Amps A” cell from each circuit in the Circuit SI screen
will be totaled together to calculate the amps value). The Unit KW sensor is selected in the “Unit KW” cell.