Troubleshooting guide

MAGNUM VERSION 8 MANUAL REVISION 3.1
36
Circuit Base setup 7.6.3.
Compressor information is provided per circuit in this section under the Circuit Base screen. Review all cells and input
the proper information about the compressor.
Relay Output Information Screen setup 7.6.4.
This screen relates to the above example. The compressor is a variable capacity compressor; therefore, the slide
information must be provided, this is used in calculating the amp draw of the compressor. Note the ‘Type’ column, for
COMP, the first compressor point, Screw NO EXV was selected from the drop down menu.