Troubleshooting guide

MAGNUM VERSION 8 MANUAL REVISION 3.1
109
7.81.4.1. Examples of User Logic Relay Outputs
In the above example the “Store Alarm Msg“ option has been enabled. When this relay goes from an OFF to an ON
state an alarm message will be generated with the name of this relay.
In this example, if either of the operands become true, then this relay will turn ON, an alarm message will be
generated, and the General alarm relay will also turn ON.
User Analog Output 7.81.5.
Linear control for Analog Output allows the user to control an analog value based on feedback from a Sensor Input or
other operant control input value. The output can be set to control only when a relay is ON and fixed at a given output
when the relay is OFF. Linear Control will monitor the Control Input and adjust the Analog Output based the
minimum/maximum output values. Linear Control settings are adjustable through MCS-Connect with Factory level
authorization.