Specifications

MCS‐BMS‐GATEWAYStartupGuide Revision4.0
MicroControlSystems5580EnterprisePkwy,FortMyers,FL33905USAWeb:www.mcscontrols.com
Tel:(239)6940089Fax:(239)6940031
8

2.2.2 SettingtheSerialBaudRate(DIPSwitch B0–B3)forBACnet MS/TP&MetasysN2
 DIP Switches B0 – B3 can be used to set the serial baud rate to match the baud rate provided by the
BuildingManagementSystemforBACnetMS/TP.
 MetasysN2isalwaysdefaultedto9600baudandtheBbankisdisabled.

Figure2:B0–B3DIPSwitches
2.2.2.1 BaudRateDIPSwitchSelection

Baud B0 B1 B2 B3
Auto
Off Off Off Off
110
On Off Off Off
300
Off On Off Off
600
On On Off Off
1200
Off Off On Off
2400
On Off On Off
4800
Off On On Off
9600
On On On Off
19200
Off Off Off On
20833
On Off Off On
28800
Off On Off On
38400
On On Off On
57600
Off Off On On
76800
On Off On On
115200
Off On On On

Figure3BaudRateTable