Specifications

MCS‐BMS‐GATEWAYStartupGuide Revision4.0
MicroControlSystems5580EnterprisePkwy,FortMyers,FL33905USAWeb:www.mcscontrols.com
Tel:(239)6940089Fax:(239)6940031
19

4.3 SetIP AddressforBACnet/IP
 Fromthemainmenu,press“I”toentertheEditIPAddressSettingsmenu
 Press“1”tomodifytheIPaddressoftheEthernetadapter
 TypeinanewIPaddressintheformat192.168.10.Xandpress<Enter>
 Ifnecessary,press“2”toandchangethenetmask

 TypeinanewSubnetMaskandpress<Enter>
 Ifnecessary,press“3”toandchangetheIPGateway
 TypeinanewIPGatewayandpress<Enter>
 Note:If the MCS‐BMS‐GATEWAY is connected to a router, the IP Gateway of the MCS‐BMS‐
GATEWAY
shouldbesettotheIPaddressoftherouterthatitisconnectedto
 UnplugEthernet cable from PC and connectthe MCS‐BMS‐GATEWAY’s ethernet cableto the network
switchorrouter
