Specifications

MICRO AIR® MX3510
CLEAN AIR SYSTEMS
4
MX3510 MICRO AIR®
CLEAN AIR SYSTEMS
5
24 5/8”
9”
5”
5
3
1
2 TYP. 2 PLCS.
4
TYP. 4 PLCS.
6
6
RCM
12 3/4”
HEPA OR CHARCOAL AS FIRST AND SECOND MAIN FILTERS
1.
Place supports
k in cabinet at a dimension of 24
15
⁄
16
” and secure with self tapping screws.
2.
Place track
j in cabinet so it rests upon supports and ” diameter pin is located behind brackets on supports.
3.
Place handle
l on supports so that it rests in notches.
4.
Lock ” diameter rods on handle and track in place with brackets
m
and self tapping screws.
5.
Place handle stop bracket
n at dimension of 27” and secure with self tapping screws. This is to keep handle from rotating
past 90° and allowing lter to loosen.
6.
Place Horizontal supports
o 1pc. on rear of cabinet at a dimension of 9”,
o
1pc. on bottom of cabinet at 5” and
o 1pc. on
bottom of cabinet at 12 ” and secure with self tapping screws.
FIG. 5