EasyTouch RV 359 Manual

Thermostat Setup

Setting the Available Sources

Press the settings button on the main screen.

Use the back and next buttons to locate the “switches” icon. Press the icon to configure the

modes from the available sources.

Press the icons to select or deselect the mode. A red circle with a line

through it will appear over the source when it is deselected.

Gas Heat Override Enable/Disable

You can enable or disable gas heat override by tapping the

Enable/Disable button under the “Auto Gas Changeover” heading. When

enabled, all of your available heat modes will act in stages based on how

far the inside temperature is from the set-point. See section Gas Heat

Override for more details. Most users will leave this setting enabled.

Invert On/Off

This setting changes the polarity of the furnace from +12 volt active

to ground active. Most users will set it for invert ON. Setting the incorrect

setting will cause the furnace to operate all the time.

Connecting remotely

EasyTouch RV can be operated entirely by the touchscreen, however you can

also communicate, monitor, and modify operation of it wirelessly using the EasyTouch

RV application. Some extra features will require a wireless connection and is described

in their sections. See section Working Wirelessly for details.

EasyTouch RV icon

ENABLED

Gas Heat Override

Enable/Disable