EasyTouch RV 359 Manual

17
©2022 Micro-Air Corp May 20, 2022, revision 1.3
Bluetooth (Account) Password Reset
This screen is used to reset the saved Bluetooth password in the thermostat. This is the
password that must match your EasyTouch RV app account to make remote connections.
Only one account can have access to the thermostat. Use this whenever you reset the
password to your app account to regain remote access to the thermostat.
Temperature Reading Adjustment
This setting allows you to calibrate the Inside temperature reading with an offset. For
example, if the inside temperature reads 72°F (22.2°C) and you feel it is 75°F (24°C), you
can use the up and down arrows on this page to increment the offset to +3°F (+1.8°C).
Temperature Gap (Hysteresis)
These settings under “heat” and “cool” headings determine the difference in temperature
required between setpoint and inside temperature before a heating or cooling cycle will
begin. This is helpful to prevent short cycling in large spaces or spaces with high thermal
loss, by running a cycle for longer amounts of time. This offset is applied to all logic that
involves setpoint operations, such as auto modes, gas heat override, etc. See Table 8 for
an operational example.
Inside
Temperature (°F)
Heating
Setpoint (°F)
Heating Gap
Setting (°F)
System Operation
69
68
3
None
66
None
65
Heating Cycle Begins
67
Heating Cycle Continues
69
Heating Cycle Terminates
Table 8 - Temperature Gap Operational Example
The setting “Auto-Fan High” determines the difference in temperature required between
setpoint and inside temperature for the Auto Fan (8) Fan Speed to switch from Fan Low
to Fan High. If Fan High is called for during a cycle then it will remain high until the cycle
terminates. See Table 9 for an operational example where the “Cool Gap Setting” is 1°F.
Inside
Temperature (°F)
Cooling
Setpoint (°F)
Auto Fan Gap
Setting (°F)
System Operation with
Auto Fan
81
78
4
Cooling with Fan Low
82
Cooling with Fan High
79
Cooling with Fan High
Table 9 - Auto Fan Speed Gap Operational Example
Measurement Units
This setting determines how to display temperatures on the thermostat. Tap the Units
button to toggle between Fahrenheit and Celsius.
Bluetooth Password
Reset
Temperature Gap
Button
Temperature
Reading Adjustment
Units Button