EasyTouch RV 356 Manual

(6) System Power

Use the power button to turn the system on or off. Button is red for off and green for on.

(7) Operational Mode

Pressing the mode button changes the current operating mode depending on what is available in your

system. All possible modes are listed below. See the Operational Modes section for more details.

Note: If you do not see a mode you should have then see section Configure your Available Outputs.

(8) Fan Speed

Pressing the fan button selects how the fan will operate in conjunction with the (7) Operational Mode.

Fans with green bars are manually always-on regardless of heating or cooling, with number of bars

indicating speed. Fan Auto turns the fan on and off with a cooling or heat pump cycle and operates as Fan

Off in all other operational modes.

(9) Settings

Pressing the settings button will change the screen to the settings screen to allow

additional configurations. See section Settings Screens for more details.

(10) Additional Status Tray

Various icons may be here to indicate active operations. This thermostat has no icons to display here.

(11) Outside Temperature

This is the temperature reading for your local area that is retrieved over the thermostat’s internet

connection and is part of the (2) Local Weather information.

Fan Only

Cool Only

Heat Pump

Only

Furnace Only

Auto Cool/Furnace

Fan Low

Fan High

Fan Auto

Fan Off

Power

Settings

Auto Cool/Heat

Pump