EasyTouch RV 355 Manual

10
©2022 Micro-Air Corp March 15, 2022, revision 1.10
Away screen (Heat and cool set points)
Away operation allows setting upper and lower limits for temperature with a non-operating
area or “dead band” in the middle. This can be useful when setting a higher daytime cooling
temperature and lower night time heating temperature. It can also be used to control the temperature
extremes when you are away from the RV. The mode selected must be an automatic mode to allow
both heating and cooling operation.
1. Press the set points area to toggle between the selected values. A blue square will show
around the value you are changing. The upper value changes the cooling set point and the lower value
changes the heating set point.
2. Use the up and down arrows to change the selected temperature value.
Weather Reporting
Weather data is returned from a weather service for your location when the thermostat is
connected to the internet. Weather information is updated whenever you touch the thermostat or
connect on Bluetooth or WIFI. The thermostat must have the green WIFI logo to receive weather data.
Location is set whenever you connect on Bluetooth only. Location can be checked by pressing
the weather icon and viewing the location on the bottom of the screen. Reconnect to the thermostat
using your smart device and the EasyTouch RV to update to your current location.