EasyTouch RV 353 Manual

ManualsBrandsMicro-Air ManualsSolar & Wind PowerWhite - EasyTouch RV Thermostat

(7) Operational Mode

Pressing the mode button changes the current operating mode depending on what is available in your

system. All possible modes are listed below. See the Operational Modes section for more details.

(8) Fan Speed

Pressing the fan button selects how the fan will operate in conjunction with the (7) Operational Mode.

Fans with green bars are manually always-on regardless of heating or cooling, with number of bars

indicating speed. Fan Auto turns the fan on and off with a cooling or heating cycle.

(9) Mood Lighting

Pressing the mood lighting button will take you to a new page where you can select the

lighting around the A/C plenum. Tap the color or “off” for the associated light setting.

First, choose the zone you want to make a change in by using the (10) Zone Selection

button. Mood lighting is optional hardware that some systems may not have, where this

setting will do nothing. Micro-Air cannot assist with acquiring mood lighting hardware.

(10) Zone Selection and Zone Status

The selected zone is shown by the yellow box. Tap this button anywhere to cycle through

the available zones in order. The changes you make on the main screen will apply to the

selected zone. Table 4 describes what a zone color means. Micro-Air cannot assist with

adding zones, however when installed they are found automatically and dynamically.

Color

Meaning

Green

Normal Operation

Red

See zone’s (4) Status Message

Gray

No zone communicating or available

Table 4 - Zone Number Color Meaning

(11) Settings

Pressing the settings button will change the screen to the settings screen to allow

additional configurations. See section Settings Screens for more details.

(12) Additional Status Tray

Various icons may be here to indicate active operations. Cooling modes will show the “Freeze” sensor

reading. This is the temperature sensor on the indoor coil, which the A/C uses to cool the space. This can

be useful for diagnostic purposes to ensure your system is running correctly.

(13) Outside Temperature

This is the temperature reading for your local area that is retrieved over the thermostat’s internet

connection and is part of the (2) Local Weather information.

Aqua Only

Fan Only

Cool Only

Furnace Only

Fan Auto

Fan Off

Settings

Dry Mode

Auto Mode

Fan Low

Fan Medium

Fan High

Mood Lighting

Zone