EasyTouch RV 352-352C Manual

Operating the thermostat

Main screen

1. Inside temperature shows the ambient

temperature of the room. If the temperature

is followed by (R), the thermostat is using the

remote sensor input on the back of the

thermostat.

2. WIFI indicator shows the state of the WIFI

connection. Green indicates WIFI is

connected properly, Red indicates

connection to router only, bars indicate signal strength, and no symbol indicates no connection.

3. Raise and lower the temperature set point using the red and blue arrows.

4. Use the power button to turn the system on or off. Button is red for off and green for on.

5. Pressing the mode icon changes from cooling or heating modes depending on what is available

in your system. See table 1 for a list of all possible modes.

Table 1

6. Pressing the fan icon selects between manual (always on) fan speeds and automatic fan speeds.

Automatic will turn the fan off after the heating or cooling cycle is completed. See table 2 for

available fan speeds.

Table 2

7. Home-away-schedule icon. Pressing this button selects between these modes. Home mode is the

normal operating mode using a single setpoint for temperature control. Schedule mode allows

changing set points throughout the day programmatically. Away mode allows setting a heating and

a cooling set point and automatically changing from heating to cooling.

8. Pressing the settings gear will change the screen to allow additional setup functions.

9. Pressing the set point will change the system units from °F to °C and back. The setpoint is also

used as an indicator of system operation. A red set point indicates a heating cycle is in process. A

blue set point indicates a cooling cycle is in process. A white icon indicates no cycle is in process

The hourglass symbol indicates that a delay is in process and operation will resume once the

delay is complete. It is an indication that the display is handling the requested operation.

Fan only

Heat strip only

Cool Only

Automatic cool and furnace

Furnace only

Automatic cool and heat pump

Heat pump only

Automatic cool and heat strip

Fan

low

Fan

high

Fan

Auto