EasyTouch RV 350 Manual

Initial setup instructions

Available modes

Switches on the control boards typically located in the air conditioners are used to configure the

system. These switches determine if the system has a furnace, heat pump, electric heat strip, generator

or other features. Operating modes available will reflect the setting of these switches. No thermostat

setup is required.

Connecting remotely

This thermostat may be operated remotely using either Bluetooth or WIFI. Apps may be loaded

from the Google Play store or Apple App store. The first time the app is opened, it will ask to create an

account. A WIFI connection on your smart device is necessary for this step. Create your account and

follow the prompts to connect your thermostat.

If a second user is going to use the thermostat remotely, they can use the same account and

password as the first user. Each thermostat can only be assigned to a single account.

Operating the thermostat

Main screen

1. Inside temperature shows the ambient temperature of

the room.

2. WIFI indicator shows the state of the WIFI connection.

Green indicates WIFI is connected properly, Red

indicates connection to router only, bars indicate signal

strength, and no symbol indicates no connection.

3. Raise and lower the temperature set point using the

red and blue arrows.

4. Use the power button to turn the system on or off.

Button is red for off and green for on.

5. Pressing the mode icon changes from cooling or

heating modes depending on what is available in your system. See table 2 for a list of all possible

modes.

Table 1

Fan only

Automatic

Heat pump

Cool Only

Aqua Heat mode

Furnace

Zone off

Heat strip

Zone on