EasyTouch RV 356 Manual
9 
©2022 Micro-Air Corp    May 16, 2022, revision 1.2 
Operating the Thermostat 
Main Screen 
This screen is where most time is spent using the 
thermostat.  This  screen  allows  you  to  set  and 
monitor  the  desired  operation  of  the  thermostat 
and is shown in Figure 1. 
(1) Inside temperature 
This is the temperature reading for the space that 
the thermostat is trying to temper, determined by a 
local  sensor.  “Inside”  means  it  is  using  a  sensor 
inside the thermostat. “Inside(R)” indicates that a 
Remote  sensor  is  in  use  and  connected  to  the 
green/white wires on the back of the thermostat.  
(2) Local Weather 
This icon indicates the local weather at the last time 
weather information was received. Tap the icon for 
more detailed weather information. See the Local 
Weather and Local Time section for more details.  
(3) Status Tray 
Various icons may be here to indicate active operations. 
The Wi-Fi indicator shows the state of the thermostat’s Wi-Fi connection. No icon means 
no connection to an internet enabling device. Red means it is connected to an internet 
enabling device but does not have internet. Green means it is connected to the internet. 
The number of bars indicate strength. See the Connecting to a New Wi-Fi Network for 
more details. 
The Furnace icon here means that the heat mode is in Active Gas Changeover. See section 
Auto Gas Changeover in Operating the Thermostat for more details. 
The  Schedule  icon  here  means  that  the  created  schedule  is  active  and  will  change 
operation on that schedule. This is turned on and off in the Settings screens. See section 
Schedule Screens for more details. 
(4) Status Message 
Various messages may be shown here to indicate active operations. See the Status Messages section for 
potential messages and their meanings. 
(5) Temperature Set Point Adjust 
Raise  and  lower  the  temperature  set-point  using  the  red  and  blue  arrows.  This  sets  the  desired 
temperature for the space based on the operating mode. All modes are listed in the (7) Operational Mode 
section. 
Wi-Fi Indicator 
Gas Changeover 
Active 
Schedule Active 
Figure 1 – Main Screen 










