EasyTouch RV 355 Manual

8
©2022 Micro-Air Corp March 15, 2022, revision 1.10
Operating the thermostat
Main screen
1. Inside temperature shows the ambient temperature of
the room.
2. WIFI indicator shows the state of the WIFI connection.
Green indicates WIFI is connected properly, Red
indicates connection to router only, bars indicate signal
strength, and no symbol indicates no connection.
3. Raise and lower the temperature set point using the
red and blue arrows.
4. Use the power button to turn the system on or off.
Button is red for off and green for on.
5. Pressing the mode icon changes from cooling or
heating modes depending on what is available in your system. See Table 2 for a list of all
possible modes.
Table 2
6. Pressing the fan icon selects between manual (always on) fan speeds and automatic fan speeds.
Automatic will turn the fan off after the heating or cooling cycle is completed. See Table 3 for
available fan speeds.
Table 3
Available in mode
Indication
Normal
Option 1
Action
Manual
fan low
Manual fan,
Cooling
Manual fan,
cooling, electric
heat, gas heat
Fan runs
continually on low
Manual
fan high
Manual fan,
Cooling
Manual fan,
cooling, gas heat,
electric heat
Fan runs
continually on high
Auto fan
Cooling, Auto
Cooling, Auto
Fan cycles with
compressor or
electric element
Fan only
Automatic
Cool Only
Gas heating
Zone off
Electric Heating
Zone on