EasyTouch RV 355 Manual

Wiring the thermostat

Original thermostats can have a plug-in connector or be direct wired to the RV manufacturer’s

wiring. Thermostats wired with a plug can simply unplug the original plug and plug in the EasyTouch

thermostat. Wired thermostats require the optional connector which can be ordered with the

thermostat or ordered separately.

To wire the connector models, match the original thermostat wiring colors to the connector

colors. Please note that manufacture wiring from the wall may not match the colors until it joins with

the wiring stub from the original thermostat. See Table 1 for details on the colors used with the

thermostat and the function of the wires.

Note: See Appendix C: 9430-334 wiring for a different wiring table when replacing model number 9430-

334.

Table 1

Original

thermostat wire

color

Micro-Air harness

color

Function

Factory harness color

(Provided to write in your

color)

2- pin

connector

Purple

Signal 1

Black

Signal 2

9-pin connector

Green

Heat 4

White

Heat 1

Blue

Ground in

Red/White stripe

+12 VDC out

Red

+ 12 VDC in

Blue/White stripe

Ground out

Orange

Heat 2

Yellow

Heat 3