EasyTouch RV 351 Manual

Operating the thermostat

Main screen

1. Inside temperature shows the ambient temperature of

the room.

2. WIFI indicator shows the state of the WIFI connection.

Green indicates WIFI is connected properly, Red

indicates connection to router only, bars indicate signal

strength, and no symbol indicates no connection.

3. Raise and lower the temperature set point using the

red and blue arrows.

4. Use the power button to turn the system on or off.

Button is red for off and green for on.

5. Pressing the mode icon changes from cooling or

heating modes depending on what is available in your system. See table 2 for a list of all possible

modes.

Table 2

6. Pressing the fan icon selects between manual (always on) fan speeds and automatic fan speeds.

Automatic will turn the fan off after the heating or cooling cycle is completed. See table 3 for

available fan speeds.

Icon

Action

Icon

Action

Fan only

Automatic cool/heat strip

Cool Only

Automatic cool/furnace

Furnace

Automatic cool/heat pump

Heat strip

Heat pump

Zone off

Aqua Heat

mode (future

option)

Zone on