Specifications

COMPONENT FOCUS
6
www.futureelectronics.com
Freescale
Semiconductor
New Freescale QorIQ processor helps to secure the network’s edge
MicrelRollsOutNewFamilyofHighCurrent,UltraLowInputVoltage
LDOs Powering Next Generation Low Voltage Cores
Low-power, cost-eective oering
incorporates advanced security capabilities
for factory equipment, DVRs, storage
applications and more
As the reach of the world’s networks
extends further into new end-devices and
previously unconnected industries, network
security has become increasingly important
to consumers, businesses and other
organizations. To help secure the growing
number of network endpoints worldwide,
Freescale Semiconductor introduces the new
QorIQ P1010, an energy-ecient processor
incorporating advanced security technology
and designed for factory equipment, digital
video recorders, storage products and other
applications.
Targeting cost-sensitive endpoint applications,
the P1010 processor delivers up to 800 MHz
of performance and features operating
power as low as 1.1W. The device provides a
trust architecture platform that helps protect
against software intrusion and software
cloning by incorporating advanced end-to-
end code signing and intrusion prevention
capabilities.
The P1010 processor is the rst QorIQ family
product member to integrate multiple FlexCAN
controllers that allow OEMs to implement
industrial protocols in factory automation
systems. It also incorporates SD/MMC, two
PCI Express® controllers, two SATA controllers
and three Ethernet controllers to address the
performance and market requirements of
NAS/DVR products.
In addition to industrial, storage and consumer
applications, the P1010 is also ideal for
cost-sensitive SOHO routers. The processor
incorporates software fast path acceleration
technology to deliver up to line rate
performance for IPv4.
“The P1010 is the newest member of the
broad QorIQ product family, which scales from
single-core oerings at 500 MHz to multicore
processors that deliver 2 GHz,” said Brett
Butler, general manager and vice president
of Freescale’s Networking Processor Division.
“While maintaining software compatibility
with PowerQUICC processors, the P1010
is a particularly versatile addition to the
QorIQ family, oering a compelling blend
of performance, lower operating power and
security for cost-sensitive markets.”
The P1010’s energy eciency and broad set of
integrated peripherals can signicantly reduce
overall system costs. The device is packaged in
a small (19mm x19mm) 425-pin TEPBGA1 with
a tight pitch at 0.8mm that enables a compact,
low-layer board and smaller overall footprint.
Low power dissipation allows for fan-less
designs. The incorporation of serial interfaces
reduces board size (SGMII Ethernet controllers)
and a 16/32-bit DDR3 memory controller
enables low-cost memory designs.
New QorIQ P1014 delivers additional cost
savings
For applications in which secure boot and
FlexCAN controllers are not required, Freescale
also oers the QorIQ P1014 processor, which is
a streamlined version of the P1010. The P1014
includes a 16-bit DDR3 memory controller
and is designed to deliver outstanding cost
benets for single or dual bay NAS, DVR and
general purpose control applications.
The QorIQ P1010 and P1014 devices are part
of the Freescale Product Longevity program,
with 10 years of assured supply. For terms and
conditions, please see: www.Freescale.com/
productlongevity.
Micrel launched the MIC61150 and MIC61300,
1.5A and 3A LDOs designed for applications
that require a low voltage, high current power
Micrel
Semiconductor
supply, generated from a single input supply.
The devices target point-of-load, ASICs, FPGAs,
microprocessors, networking cards and low
voltage post regulation applications. Samples
can be ordered on
line at: www.micrel.
com/ProductList.do.
The new high-
current LDOs
operate over an
input voltage range
of 1.1V to 3.6V.
The MIC61150
and MIC61300
feature ultra-low
dropout voltages of
200mV and 350mV
respectively, over
the entire operating
temperature range.
The regulators are
available as a 1V
xed-output voltage
option or as an adjustable output voltage
option (adjustable down to 0.5V). The devices
are stable with low-ESR ceramic output
capacitors and include protection features
such as thermal shutdown, current limiting
and logic enable. The high-current LDOs are
oered in two dierent packages: a low-prole,
leadless 10-pin 3mm x 3mm MLF® and a 10-
pin ePad MSOP. The devices have an operating
junction temperature range of -40°C to +125°C.
FAX
[phone]
EMAIL
ftm.asia
@
futureelectronics.com
Reader Response No.
8
FAX
[phone]
EMAIL
ftm.asia
@
futureelectronics.com
Reader Response No.
9