Specifications

Preliminary Information 42PQ30

Control PWB Connector P111 to Y

SUS P101 Voltages and Resistance

P111 These pins are very close together. When taking Voltage measurements use Caution.

Pins 3, 4, 5, 6, and 7

Receive +5V from the Y-SUS.

FL111 and FL112 +5V Fuse

Pins 1, and 2

Receive +15V from the Y-SUS.

Pins 9, 10, 11 and 30

Are Ground

All the rest are delivering

Y-Drive logic signals to the Y-SUS Board

The +15V is not used by the

Control board, it is routed to the

Z-SUS leaving on P101 Pins 11

and 12.

Pin c

Odd

Pins

Even

Pins