Specifications

Preliminary Information 42PQ30

VZ (Z

Bias) Adjustment

VZ (Z-Bias) TP Right

Side R49 or R50

Read the Label on the back of the

upper left hand side of the panel.

Adjust using VR8.

Set should run for 15 minutes, this is the “Heat Run” mode.

Set screen to “White Wash” mode or 100 IRE White input.

Adjust VZ (Z-Bias) to Panel Label (± 1V)

Z Bias

Bottom Center of Z-SUS Board

VR8

Measured from Chassis Ground