Specifications

60
Preliminary Information 42PQ30
Voltage Measurements for the Y SUS Board
P101 Y
P101 Y
-
-
SUS to Control PWB P111 Plug Information
SUS to Control PWB P111 Plug Information
These connector pins are too close to read without
possible damage to the PWB
Actually a 30 Pin Connector “Measurements can be made
on the Control PWB
Y-SUS Board B+ checks for the P101 connector.
FS201
5V to run the Control Board.
Also sent to the Z-SUS Board.
Routed through the Control Board.
Leaves the Control Board on P101 pins 10.
FS501
15V to run the Z-SUS Board.
Routed through the Control Board.
Leaves the Control Board on P101 pins 11 and 12.
Run: 5VStandby: 0V Diode Check: 1.1V
Run: 15VStandby: 0V Diode Check: 0.78V