Instruction manual

T30
-9-
OPERATION
Suction of Dry Dust and Dirt
■ The filter cartridge (7) has to be completely
pushed in and is secured by turning the filter
cartridge cap (10). Check that it fits correctly.
■ In order to remove the cartridge filter (7) turn
the cap (10) anti-clockwise and draw the
cartridge filter. Fix the paper-filter bag (8) to
the inner side of the tube-connection in the
container, ensuring it is fully seated. When
using the paper-filter bag the dirt can be
removed more hygienically and the life-
endurance of the cartridge filter will be
extended. The paper-filter bag (8) should
never replace the cartridge filter, however the
12 micron cartridge filter can be used without
the paper-filter bag. The 0.3 micron cartridge
filter should always be used with a paper
filter bag.
If suction pressure decreases,
replace the paper-filter bag
with a new one. From time to
time the cartridge filter (7)
should be cleaned with a soft
brush, ensuring longer life and
at the same time higher
performance.
When vacuum cleaning dry
material, always use a cartridge
filter, otherwise it could damage
the motor.
7
10
8
8
7
10