Instruction manual

T30
-5-
VACUUM CLEANING SAFETY
General Safety
Fire and explosion hazard.
■ Never vacuum-clean inflammable fluids, such
as gas, oil, alcohol, solvents, etc. Do not
work near inflammable fluids or gas. Never
vacuum-clean warm fluids or material at more
than 60˚C, such as burning cigarettes, ashes,
glowing coals, etc.
Do not vacuum hazardous
substances.
■ Do not pull the cable and do not damage the
isolation of the cable. When faulty, the cable
must be replaced immediately.
■ Always keep the cartridge filter clean.
■ Always trail the cable away from the working
area.
Fire and explosion hazard.
Do Not Vacuum:
■ Hot materials (glowing cigarettes, hot ashes,
etc.)
■ Inflammable, explosive or aggressive fluids
(e.g. petrol, solvents, acids, alkalines, etc.)
■ Inflammable, explosive dusts (e.g.
magnesium or aluminium dust, etc.).
General Safety Regulations when
Routing
Noise
The level of noise when routing may exceed 85
dB(A). It is therefore advisable to wear ear
defenders especially if routing for long periods of
time.
Eye Protection
Goggles, safety spectacles or visors should be
worn to protect the eyes from ejected waste
particles.
Dust Protection
The fine dust created when routing presents a
severe health risk if it is inhaled. Always wear a
dust protection mask or respirator and use the
dust spout connected to the T30A/T30AF
extractor. Dust masks should be changed
regularly.