Instruction manual

T30
-10-
Suction of Fluids
Before picking up fluids, do not forget to:
- empty container (9)
- remove paper-filter bag (8)
- remove cartridge filter (7)
Should the cartridge filter not be removed by
mistake this could lead to motor damage. In
order to guarantee enough air flow it is
recommended not to immerse it completely in
the fluids. When the fluids have reached the
highest permitted level in the container, the float
regulator (6) automatically blocks the suction
and the motor pitch will change: switch off the
vacuum cleaner IMMEDIATELY, pull out the
plug, remove the suction head from the
container and empty the container.
MAINTENANCE
■ After every use empty container (dirt, dust
and fluids). Never leave fluids in the tank,
these could damage the filters and container
in the course of time.
■ After having picked-up fluids, dry the
extension tubes, hose and motor-parts by
running the vacuum-cleaner for a few
minutes, having emptied the container.
Always keep a reserve of paper-filter bags
and cartridge filters, so that the vacuum
cleaner is always ready for use.
Before plugging in your extractor,
make sure that the power switch of
your power tool has been TURNED
OFF to avoid its accidental starting.
Remember the power tool socket is
always live when your extractor is
plugged in.
7
6
RECYCLING
Machine, accessories and packaging should be
sorted for environmentally friendly recycling.
GUARANTEE
The machine carries a manufacturers guarantee
in accordance with the conditions on the
enclosed guarantee card.
For the location of your nearest Trend Service
Agent, please call the telephone number at the
back of this manual.