Specifications

Installation
MICOM-H Owner’s Guide 56
Mobile Mounting Kit
1.
Mount the accessory mounting tray in the desired location. Use the tray as a
template if holes must be drilled.
Figure 4: Accessory Mounting Tray
2.
Use the four supplied screws to fasten the mounting tray bracket to the bottom
of the radio housing.
3.
Drill an additional hole for the grounding bolt.
4.
If a mounting tray is used, slide the radio with the bracket into the tray and
fasten the bracket to the tray with the supplied screw.
8.74” (222mm)
11.8” (300mm)