Specifications

Installation
MICOM-H Owner’s Guide 54
Base Station
Installation
You can use either an AC power supply or a 12 V battery as the radio power supply .
(It is possible to connect a backup battery to the battery terminals on the power
supply). Power Supply model F2369 for 220 V AC, 50 Hz, field programmable for 110
VAC, 60 Hz should be used for this purpose.
Figure 2: Power Supply
This power supply also serves as a charger for the external backup 12V battery, if
connected. When AC power failure occurs, the battery functions as the main power
source. When AC power is again available, the power supply charges the battery.
The cable and connector supplied with the power supply enable connecting the
supply directly to DC connector J4 at the radio rear panel. (The DC Power Cable
supplied with the radio is not used in this installation).
RED
GRN
BAT+
GND-BLK
GND-
FKN5865
RADIO
POWER SUPPLY
F2369
POWER SUPPLY
F2369
12-V BACKUP
BATTERY
12-V BACKUP
BATTERY
- +