Specifications

MICOM-H Owner’s Guide 53
Installation
General
This section describes the installation of the radio.
Inspection
Carefully inspect the radio immediately upon receipt, and notify the shipper of any
damage incurred in transit.
Planning the
Installation of your
Radio
Before installing the radio, familiarize yourself with the installation procedure
detailed.
Select the mounting location taking into account convenience of access to electrical
connections and maintenance. The selected location should be clean, dry and well
ventilated. Do not mount the unit in close proximity to strong electrical fields
produced by brush motors and generators, welders, etc.
The antenna, antenna tuner and associated cable kits are provided separately, and
these should be installed before the radio itself is installed. Follow the instructions
included with the units and kits.
The radio may be placed on any sturdy, flat surface. An accessory mounting tray
(included in the Mobile Mounting Kit, FLN2272) allows the radio to be mounted in
any position.
No preliminary internal wiring connections are required before installing the radio.