Specifications

Radio Programming
MICOM-H Owner’s Guide 44
CW Operation
You can select one of three CW frequency filters: 0.25 K, 0.5 K or 0.8 K.
To select a CW frequency filter:
1.
Access the Radio Parameters Programming menu:
MENU
>
MORE
>
PROG
(F2) >
RAD
(F1) >
PRMT
(F2).
2.
Press
MORE
twice to scroll to the third menu screen.
3.
Press
CW
(F2) to access the CW filters.
4.
Press
0.25
(F1),
0.5
(F2) or
0.8
(F3) as required.
5.
Press
ENTER
to confirm.
Receive Level
You can enable or disable the Receive Level (Rx) bar.
To enable/disable the receive level bar:
1.
Access the Radio Parameters Programming menu:
MENU
>
MORE
>
PROG
(F2) >
RAD
(F1) >
PRMT
(F2).
2.
Press
MORE
twice to scroll to the third menu screen.
3.
Press
RCLV
(F3) to change the Rx bar status.
4.
Press
YES
(F1) to enable or
NO
(F2) to disable the Rx bar.
5.
Press
ENTER
to confirm.
RADIO
PARAMETERS
BAUD DPWR MST AST
RADIO
PARAMETERS
ATTN CW RCLV DIM
PROG
CW – 0.8
0.25 0.5 0.8
RADIO
PARAMETERS
BAUD DPWR MST AST
RADIO
PARAMETERS
ATTN CW RCLV DIM
PROG
Rx LEVEL – NO
YES NO