Specifications

Radio Programming
MICOM-H Owner’s Guide 43
Alternate Display
Time-out
You can define the number of seconds that elapse before the menu display returns to
the previous screen.
To set the display time-out:
1.
Access the Radio Parameters Programming menu:
MENU
>
MORE
>
PROG
(F2) >
RAD
(F1) >
PRMT
(F2).
2.
Press
MORE
to scroll to the second menu screen.
3.
Press
ADT
(F4) to access the time-out setting display.
4.
Press
<--
(F2) to decrement the displayed value by 1.
Press
-->
(F3) to increment the displayed value by 1.
Press
1
(F1) to quick-set the value to 1.
Press
10
(F4) to quick-set the value to 10.
5.
Press
ENTER
to confirm.
Attenuator
You can enable or disable the attenuator.
To enable/disable the attenuator:
1.
Access the Radio Parameters Programming menu:
MENU
>
MORE
>
PROG
(F2) >
RAD
(F1) >
PRMT
(F2).
2.
Press
MORE
twice to scroll to the third menu screen.
3.
Press
ATTN
(F1) to access the attenuator options.
4.
Press
YES
(F1) to enable or
NO
(F2) to disable the attenuator.
5.
Press
ENTER
to confirm.
RADIO
PARAMETERS
BAUD DPWR MST AST
RADIO
PARAMETERS
PTBP KBBP TONE ADT
PROG
ADT – 5 SEC
1 10
RADIO
PARAMETERS
BAUD DPWR MST AST
RADIO
PARAMETERS
ATTN CW RCLV DIM
PROG
ATTEN – NO
YES NO