Specifications

Radio Programming
MICOM-H Owner’s Guide 40
Data Power
The MICOM-H provides four data power levels:
■
LOW – 25W
■
MED – 62.5W (medium)
■
HIGH – 100W
■
MAX – 125W (maximum).
When data PTT is used, the radio sets the transmitter power level to the minimum
possible value between the determined data power value and the power level of the
currently used channel.
To set the data power level:
1.
Access the Radio Parameters Programming menu:
MENU
>
MORE
>
PROG
(F2) >
RAD
(F1) >
PRMT
(F2).
2.
Press
DPWR
(F2) to access the data power options.
3.
Press the function key below the power level of your choice:
LOW
(F1),
MED
(F2),
HIGH
(F3) or
MAX
(F4).
4.
Press
ENTER
to confirm.
Microphone Side
Ton e
You can enable or disable the microphone side tone, which echoes the transmitted
voice from the MIC PTT to the speaker.
To enable/disable the Microphone Side Tone (MST):
1.
Access the Radio Parameters Programming menu:
MENU
>
MORE
>
PROG
(F2) >
RAD
(F1) >
PRMT
(F2).
2.
Press
MST
(F3) to access the Microphone Side Tone
options.
3.
Press
YES
(F1) to enable or
NO
(F2) to disable the microphone sidetone.
4.
Press
ENTER
to confirm.
RADIO
PARAMETERS
BAUD DPWR MST AST
PROG
DT PWR – LOW
LOW MED HIGH MAX
RADIO
PARAMETERS
BAUD DPWR MST AST
PROG
MIC ST-NO
YES NO