Specifications

Radio Programming
MICOM-H Owner’s Guide 39
Radio Parameters
You can program the following radio parameters:
■
BAUD – Baud rate
■
DPWR – Data power
■
MST – Microphone Side Tone
■
AST – Accessory Side Tone
■
PTBP – PTT Release Beep
■
KBBP – Keyboard Beep
■
TONE – Tone level
■
ADT – Alternate Display Time-out
■
AT TN – Atte nuator
■
CW – Continuous Wave
■
RCLV – Receive Level
■
DIM – Dimming Mode
The definition of each of the parameters is explained in the following sections.
Baud Rate
The MICOM-H provides four baud rates:
■
1200 bps
■
2400 bps
■
4800 bps
■
9600 bps.
These baud rates are used when the radio is to communicate with external devices
such as: RSS, E-mail and remote control.
To set the baud rate:
1.
Access the Radio Parameters Programming menu:
MENU
>
MORE
>
PROG
(F2) >
RAD
(F1) >
PRMT
(F2).
2.
Press
BAUD
(F1) to access baud rate options.
3.
Press the function key below the baud rate of your
choice:
1.2
(F1) - 1200 bps
2.4
(F2) - 2400 bps
4.8
(F3) - 4800 bps
9.6
(F4) - 9600 bps
4.
Press
ENTER
to confirm.
The message “WAIT...” appears on the display for a few
seconds.
RADIO
PARAMETERS
BAUD DPWR MST AST
PROG
BAUD – 2400
1.2 2.4 4.8 9.6
PROG
WAIT . . .
1.2 2.4 4.8 9.6