Specifications

Radio Programming
MICOM-H Owner’s Guide 35
Channel Frequency
The Channel Frequency setting enables you to determine the specific frequency for
each channel, and the frequency type:
Simplex Frequency (SMPX) – transmits and receives on the same frequency.
Duplex Frequency (DPLX) – transmits on one frequency and receives on a different
frequency.
Receiving Only Frequency (RXO) – restricts a frequency for reception only.
Transmitting Only Frequency (TXO) – restricts a frequency for transmission only.
To set a channel’s frequency:
1.
Access the Channel Programming menu:
MENU
>
MORE
>
PROG
(F2) >
RAD
(F1) >
CHAN
(F1).
2.
Press
MORE
to scroll to the second menu screen.
3.
Press
FREQ
(F1) to access the frequency options.
4.
Press the function key below the frequency type of your choice:
SMPX
(F1),
DPLX
(F2),
RXO
(F3) or
TXO
(F4).
5.
Use the keypad to enter the frequency of your choice.
6.
Press
ENTER
twice to confirm.
Note
When the DPLX function is selected, the F2 key toggles between Rx
and Tx frequencies.
Note
Use the
*
key as a decimal point if you need to program the 100 Hz and
10 Hz digits after the decimal point.
CHAN
PARAMETERS
GET STOR ERAS PWR
CHAN
PARAMETERS
FREQ BAND MODE AGC
SMPX
F 10,000.00
SMPX DPLX RXO TXO