Specifications

Radio Programming
MICOM-H Owner’s Guide 34
Erasing a Channel
ERAS is used to delete a channel from the radio.
To erase a channel:
1.
Access the Channel Programming menu:
MENU
>
MORE
>
PROG
(F2) >
RAD
(F1) >
CHAN
(F1).
2.
Press
ERAS
(F3).
The last active channel number is displayed, blinking.
3.
With the keypad, enter the channel number you want to
delete.
OR
Use the scanning wheel or the
UP
/
DOWN
scroll keys to select the channel you wish
to delete.
4.
Press
ENTER
to confirm.
Transmission Power
Level
You can set one of four transmission power levels for a programmed channel:
•LOW– 25W
•MED– 62.5W (medium)
• HIGH – 100W
• MAX – 125W (maximum)
To set the channel’s transmission power level:
1.
Access the Channel Programming menu:
MENU
>
MORE
>
PROG
(F2) >
RAD
(F1) >
CHAN
(F1).
2.
Press
PWR
(F4) to access the power level options.
3.
Press the function key that appears below the power level of your choice:
LOW
(F1),
MED
(F2),
HIGH
(F3) or
MAX
(F4).
4.
Press
ENTER
to confirm.
Notes
• If the channel is not programmed, you will receive a “NOT
PROG” message.
In all these cases, the erase request is rejected by the radio.
CHAN
PARAMETERS
GET STOR ERAS PWR
PROG
ERASE CH 1
PROG
ERASE CH 31
BACK CLR
PROG
ERASING
CHAN
PARAMETERS
GET STOR ERAS PWR
PROG
POWER LOW
LOW MED HIGH MAX