Specifications

MICOM-H Owner’s Guide 31
Radio Programming
The MICOM-H is already configured for use at the time of purchase. However, you
may wish to change the configuration to suit your own needs or to reflect changes in
the environment or networks. The radio can be programmed through the front panel
(if the radio is not locked), or using the appropriate RSS (Radio Service Software).
The following sections relate to programming of radio parameters using the front
panel.
After locating the required radio parameter in the programming menu, you can
change it by pressing the function key under the parameter name
OR
you can press the
UP
/
DOWN
keys to scroll through the parameters.
To enter Radio Programming mode:
1.
Press
MENU
to display the menu screen.
2.
Press
MORE
to scroll to the second menu screen.
3.
Press
PROG
(F2) to enter Program mode.
4.
Press
RAD
(F1) to enter Radio Programming mode.
In this menu, you can program:
■
channels
■
radio parameters
■
radio options
The following sections explain the programming procedures in detail.
!
Important
If the message “NOT PROGRAM” is displayed after the self test, you cannot
enter programming mode, and the radio must be programmed through the
RSS.
MENU
CHAN FREQ BIT
MENU
LOCK PROG PSW DIM
PROG
RAD LANG
RADIO
PROGRAMMING
CHAN PRMT OPTS