Specifications

Radio Operation
MICOM-H Owner’s Guide 26
Using the BITE
(Built-In Test
Equipment)
BITE is a testing tool used for radio maintenance and troubleshooting.
To run BITE:
1.
Press
MENU
to display the menu screen.
2.
Press
BIT
(F4).
In BITE mode, you can run the following tests:
•
FULL
(F1) runs a full test of the hardware device
•
CHAN
(F2) tests the device on the current channel frequencies
•
L.RF
(F3) low RF; tests the low RF path.
3.
While BITE is in progress, the message “IN TEST...” is
displayed. The number of periods indicates the
progress of the test.
4.
If the test passes successfully, the name of the test and
the word PASS are displayed.
5.
If BITE detects a malfunction, the error number is
displayed in the first line of the display and a short
description of the error appears in the second line.
See page 48.
6.
Press the
UP
/
DOWN
scroll keys to see if there are additional error messages.
7.
Press
EXIT
(F1) to exit Error mode.
MENU
CHAN FREQ SCAN BIT
BITE
FULL CHAN L.RF
BITE
IN TEST...
BITE
L.RF
–
PASS
FULL CHAN L.RF
ERR23
PRESELECTOR
EXIT