Specifications

Radio Operation
MICOM-H Owner’s Guide 25
When scanning has been stopped, you can use the following options:
SCAN
(F1) activates scanning.
BAND
(F2) toggles between upper side band (USB) and
lower side band (LSB).
SQ
(F3) toggles the squelch
(on/off).
DSP
(F4) accesses the Digital Signal Processing menu,
which includes:
•
CLAR
(F1) clarifier
(off/less/more)
*
not available for Tx Only channels
•
NF
(F2) notch filter
(off/less/more)
*
not available for CW or Tx Only channels
•
CLIP
(F3) clipper
(on/off)
•
NB
(F4) noise blanker
(on/off)
*
optional, to be purchased separately
•
ATTN
(MORE, F2) attenuator
(on/off)
PWR
(MORE, F1) power level selection
(low, med, high or max)
MODE
(MORE, F2) operation mode selection
(SSB, AME or PLT)
AGC
(MORE, F3) automatic gain control
(fast/slow/off)
BW
(MORE, F4) bandwidth selection
(2.1 K, 2.7 K, 3.0 K, 3.3 K, LSM or CW;
CW includes bandwidths 0.25 K, 0.5 K and 0.8 K,
see “CW Operation” (page 44)
).
SCAN
GROUP A 4
STOP SLOW FAST GRP
STOP
BAND LSB
SCAN BAND SQ DSP
STOP
SQUELCH ON
SCAN BAND SQ DSP
STOP
DSP PARAM
CLAR NF CLIP NB
STOP
CLAR +100
OFF
STOP
NF –– ––
OFF
STOP
CLIP
–
ON
CLAR NF CLIP NB
STOP
NB
–
ON
CLAR NF CLIP NB
STOP
ATTEN – OFF
ATTN
STOP
POWER HIGH
LOW MED HIGH MAX
STOP
MODE PLT
SSB AME PLT
STOP
AGC FAST
PWR MODE AGC BW
STOP
BW 3.3
2.1 2.7 3.0 3.3