Specifications

Radio Operation
MICOM-H Owner’s Guide 24
Scan Mode Options
In Scan mode various parameters and options can be set, using the function keys.
To select scan mode options:
STOP
(F1) stops scanning.
SLOW
(F2) decreases the scan speed.
FAST
(F3) increases the scan speed.
GRP
(F4) enables selection of a scan group.
Note
The change of options is temporary. When you resume
scanning, all changed parameters will be lost.
Note
The scan speed can be: 1 to 5 seconds, 1 second per
step; or 150 to 950 milliseconds, 50 milliseconds
per step.
STOP
GROUP A 59
SCAN BAND SQ GRP
SCAN
RATE 4 sec
STOP SLOW FAST GRP
SCAN
RATE 900 ms
STOP SLOW FAST GRP
SCAN
GROUP A
BCDE